Breville BCS500XL Bedienungsanleitung PDF herunterladen (Seite 7)

12

13

OPERATING YOUR BREVILLE CORDLESS HAND BLENDER OPERATING YOUR BREVILLE CORDLESS HAND BLENDER

To select the desired speed:3.

a) For low speed, lightly depress the

Speed button.

b) For high speed, ﬁrmly depress the

Speed button.

NOTE:

Ensure the Power button is

depressed ﬁrst.

Ensure the Power button has

been depressed for 1 second before

depressing the Speed button.

Ensure both the Power button

and Speed button are depressed

together.

CORDLESS HAND BLENDER

(STICK MIXER)

To detach the stainless steel

blending shaft

Ensure the Cordless Hand Blender is

switched off by keeping hands clear of the

Power button and Speed button. Unscrew

the blending shaft from the motor body in a

clockwise direction (See Fig. 1).

To attach the stainless steel

blending shaft

Hold the shaft with the blades down, and

align the top end of the blending shaft with

the corresponding end of the motor body.

Screw the shaft into the motor body in an

anti-clockwise direction.

THE STAINLESS STEEL ICE

CRUSHING BLADES ON

THE BLENDING SHAFT ARE

EXTREMELY SHARP, KEEP

FINGERS AWAY FROM THE

BLADES AT ALL TIMES.

To use the stick blender

Ensure the stick blender is completely and

properly assembled as detailed on the

previous page.

Place food to be processed into the 1.

mixing jug provided (or a sufﬁciently large

mixing bowl or saucepan). The mixing

jug provided should only be ﬁlled up to

the 'LIQUID MAX' mark when blending

liquids.

Place the blending shaft as deeply as 2.

possible into the mixing jug and depress

the Power button (top button) to turn the

Cordless Hand Blender on. While still

depressing the Power button, depress

the Speed button (bottom button). To

select the desired speed, the Speed

button should be lightly depressed for

low speed and ﬁrmly depressed for

high speed. Both the Power button and

the Speed button must be depressed

simultaneously for the required duration

of operation (see Fig. 2).

Work through the ingredients in the 3.

mixing jug with a gentle raising and

lowering motion.

!

Switch off the Cordless Hand Blender 4.

motor by releasing the Power and Speed

buttons.

Ensure the motor has completely 5.

stopped before lifting the Cordless Hand

Blender out of the mixing jug.

Recommendations when using

the Cordless Hand Blender as a

stick blender:

The Cordless Hand Blender blends foods 1.

and liquids rapidly, therefore it is easy to

over-process. Remember when using

the Cordless Hand Blender, check food

throughout operation.

The stainless steel blending shaft on 2.

the Cordless Hand Blender allows for

hot food to be processed directly in

the saucepan. This makes blending

soups and sauces very easy. For safety

reasons, remove the saucepan away

from the heat source before processing.

Ensure the Cordless Hand Blender is

kept away from any heat source.

When pureeing and blending, cut food 3.

into uniform sizes. This will ensure

smooth and consistent results.

Warm all liquids to be added to soups 4.

and purees, this will ensure even

blending.

Use the storage lid of the mixing jug as a 5.

non slip base for the jug during blending.

This will keep the jug stable.

Do not operate the appliance 6.

continuously for more than 60 seconds.

Allow the motor to rest for 1 minute

between each use.

1 2 3 4 5 6 7 8 9 10 11 12 ... 30 31

Kommentare zu diesen Handbüchern

Keine Kommentare